Production drawing is a complete set of detail and assembly drawings for component/ part manufacturing .It contents draw orthographic views of each part and assembly.
Production drawing is defined as 'withdrawn (graphical) information, prepared by the designer for use by a team of construction or production, the main purpose is to determine the size, shape, location and production of buildings or components'. For example, if engineering drawings are required for the screw to be tied to a specific torque, the drawings will usually intricate production tools that will be used for the binding screws, and how it should be intricate. If the screws in a convenient place might be too complicated images that fastening has to be done at the beginning of the assembly procedure, before access is limited.
Details of the material, number of parts required for assembly, etc., are provided in the title block of production drawing. Sub-assembly or major assembly of components will be assembled in which he also must be shown by production drawing.
"A picture or a component part that is referred to as image production". This is the official document to produce components on the shop floor. It also should mention no. parts needed to make the assembled unit, which in part was a member.
Tidak ada komentar:
Posting Komentar