Halaman

Rabu, 26 September 2012

Well Completion Design - Developments in Petroleum Science

Well Completion Design - Developments in Petroleum Science

Settlement is the link between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. Shall be designed to safely maximize the recovery of hydrocarbons from a well and may have to last for many years under changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions.
Well Completion Design, Volume 56 (Developments in Petroleum Science) 

  • Course book based on course completion design by TRACS International either
  • Unique in its field: Coverage of offshore, subsea, and landbased settlement in all the world's major hydrocarbon basins.
  • Full color

Advanced Well Completion Engineering

Advanced Well Completion Engineering, Third Edition 
Once the natural gas or oil wells were drilled, and have verified that the commercial should be "resolved" to allow the flow of oil or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and gradually the right equipment to ensure smooth flow out of the well. In recent years, this process has been greatly enhanced by new technology. Well Completion Engineering summarizes and explains sophisticated advancement while providing expert advice for deploying new systems engineering breakthroughs.

This book has two themes: one, the idea of ​​preventing damage, and prevents the formation of drilling into an oil formation stage to put a good introduction, and two, the use of nodal system analysis method, which optimizes the pressure distribution of the reservoir to the well head, and plays sensitivity analysis to design first and then the tube diameter production casing size, so as to achieve the optimization of the entire system. With this book, drilling and production engineers should be able to improve operational efficiency by implementing the latest state of the art technology in all aspects of well completion during development drilling completion and work over operations.

One of the books devoted solely to key technologies for all aspects of the event settlement is well advanced.
Unique coverage of all aspects of well completion by 25 years of industry exploration, production and completion.
Matchless in-depth technical advice to achieve operational excellence with advance solutions.

"Well done Engineering, explains Renpu (China National Petroleum Corporation), involves ensuring regular and safe production and extend the life of oil and gas production wells. He said traditional practices that have been developed in China are no longer adequate for the changing circumstances and changing, and must be reformed , or advanced. It covers the basics, selection mode, select and specify the size of tubing and production casing, completion fluids and perforating, production casing and cementing, perforating, completion of the evaluation of formation damage well, measures to put wells in production, tubing string, wellhead assembly, and good corrosion and its prevention "-. SciTech Book News


Selasa, 25 September 2012

Subsea Engineering Handbook

Subsea Engineering and Deepwater Petroleum Exploration & Production Handbook


Designing and building structures that will withstand the unique challenges that exist in Subsea operations is no easy task. As deepwater wells are drilled to greater depths, engineers are confronted with a new set of problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility, to name just a few. A definitive reference for engineers designing, analyzing and instilling offshore structures, Subsea Structural Engineering Handbook provides an expert guide to the key processes, technologies and equipment that comprise contemporary offshore structures.
You can have this  Subsea Engineering Handbook  right now!
Written in language that is clear and easy to understand, the book is based on the authors 30 years of experience in analysis, design and gradually offshore structures. This book answers important questions mentioned above and covers the entire spectrum of subjects in the discipline, from route selection and planning to design, construction, installation, materials and corrosion, inspection, welding, repair, risk assessment, and applicable design solutions. This produces a roadmap not only for the subsea engineer but also the project managers, estimators and regulatory personnel hoping to gain an appreciation of the overall issues and directed approaches to subsea engineering design solutions.

Up-to-date technical overview of deepwater riser engineering
Easy to understand Coverage of design, analysis and, stallation
Address issues of fixed and floating platforms
Covers techincal equipment such as Subsea Control Systems, Pressure Piping, Connectors and Equipment Layout as well as remotely operated vehicles

"Combined, these two authors have a long career with large international companies and educational institutions in the U.S., Japan, and Norway. They have prepared this book for prospective subsea engineers, discipline described in the preface that involves" the design, analysis, construction, installation and integrity management of subsea wellhead, trees, manifolds, jumpers and PLEMs PLETS .... "Coverage is logically organized, beginning with a subsea production system (the development, distribution, surveying, positioning, and foundations, the estimated cost. Coverage of power supply, and the risk and reliability, among other topics) further includes insurance and engineering flow systems, structures and equipment., and umbilical, risers & flowlines to the Gulf oil spill, the world saw the consequences of poor engineering and management; texts is important for a thorough education of future practitioners "-. News Books, Reference & Research

About the Subsea Engineering Handbook's Author
Yong Bai working in structural analysis and design with a focus on pipelines, risers and floating systems. Yong has led several projects Asgard Transport pipeline and flowline at JP Kenny Norway office as its Manager Advanced Engineering Dept. Previous Yong has been a lead riser engineer at Shell EP Projects, and leading offshore development rules in the American Bureau of Shipping (ABS) as a manager over Department of Offshore Technology as a professor, he wrote a book entitled "Subsea Pipelines and risers" and "Marine Structural Design" and served as course leader for IBC and Clarion courses on Pipeline Design and floating riser and System Design. Yong is President of the Offshore Pipeline & Risers (OPR) Inc., a design / consulting in the areas of plumbing, risers and floating systems.

Deepwater Petroleum Exploration & Production: A Nontechnical Guide, 2nd Edition

You can have this  Deepwater Petroleum Exploration & Production: A Nontechnical Guide, 2nd Edition right now!
New second edition of the authoritative book has retained all the good original bestseller, describes the unique challenges of the oil and gas exploration and production in the world's deepwater provinces. New chapters on geology and geophysics, rig, and vehicle service included, and the scientific and engineering schemes used in deepwater will be discussed in more detail. The case studies in several chapters provide practical examples, while the final chapter presents the latest technology used in the "third wave" industrial evolution.

Having more than I even anticipated. Thorough and precise. I have learned a lot from this book, especially geosciences and then came part Elementary drilling in water. I am very impressed.

Dr. Leffler has had 36 years of experience in the sector of the oil industry exploration / production, petrochemical, refining, marketing and transportation as a manager, consultant, strategist, and other executive positions for Dutch / Shell Companies Royal. Leffler has authored or co-authored several books that have become industry standards, including
  • Petroleum Refining in Nontechnical Language
  • Petrochemicals in nontechnical language
  • Deepwater Exploration & Production - Free nontechnical
  • Oil & Gas Pipe in nontechnical language
  • Oil & Gas Production in Nontechnical Language.
  • More than 120,000 copies of the books have been sold.



The Piping Guide For the Design and Drafting of Industrial Piping Systems

The Piping Guide For the Design and Drafting of Industrial Piping Systems


From the development of the initial requirements for the final image that is used in construction, this authoritative reference for the design and preparation of industrial piping systems provide the step-by-step instructions for pipeline design. Created as a deep resource for professionals, this Bible is a valuable pipeline in the field as in the office or classroom. Among the topics covered in the survey is encyclopedic piping design engineering, pipe assembly of the components, the method to connect the pipe to the equipment, office organization, to translate the concept into the design is complete, and the terms and abbreviations are concerned. An extensive selection of charts and tables present a variety of information-frequently used data, to establish the width pipeways factor, the distance between the pipes with and without flanges and to "jumpovers" and "runarounds," principal dimensions and weights for key components; conversion to customary and metric units, direct-reading metric conversion tables for dimensions and data, and a metric supplement with principal dimensional data in millimeters-handily organized for quick reference.
Get this  The Piping Guide: For the Design and Drafting of Industrial Piping Systems  today!
I use this book all the time for the picture tube. I agree with others that it is really "the Bible of Process Piping". I am an engineer barrow of my frequent. Pictures and graphics on each page. Welding specifications for pipes, pipe fittings and instrumentation assembly details, details of support for pipes, valves of different descriptions and details, P & ID symbols, welding symbols, tons of pictures all show the procedure for the preparation of piping layout and piping details examples, charts many many just about anything you need from the beam size for a standard flange, stress, thread depth charts, etc.. It is one, buy it!

This is one of the best books I've encountered in years piping. This book is a complete, concise and very informative. This is a great addition to my library and piping would'nt go on the road without it! A "must have" book for all technical, designers and draftsmen engineers!

Process Plant Layout and Piping Design

Get this Process Plant Layout and Piping Design right now!
Based on the collective author of '65 years of experience in the engineering construction industry, this profusely illustrated comprehensive guidebook presents a method that can be applied to a tried-and-true and the rule of thumb for plant layout and piping design for the process industries. Content organized and presented for quick-reference on-the-job or for systematic study of specific topics. Presents general concepts and principles of plant layout - from basic terminology and input requirements to deliverables, deals with specific pieces of equipment and the most efficient layout in the overall plant design configuration, discuss plant layout requirements for the most common process equipment units ; include piping requirements for the entire plant as well as all types of equipment, and considering the computerized tools that are now available to help plant layout and piping designers. Features more than 640 illustrations of equipment, piping and other components of processing facility - and their configurations. MARKETS: For mechanical and chemical engineers working for engineering construction as well as process manufacturing companies with responsibility for plant layout, plumbing, and construction, and for engineering students.

Advanced Piping Design (Process Piping Design)

Get this Advanced Piping Design (Process Piping Design) right now!
Written for engineers and piping designers in the field, this two-part series helps to fill a severe void in piping literature, since the "Rip Weaver" books of the 90's was taken out of print at the advent of Computer Aided Design (CAD) era. "Advanced Piping Design" is a mid-level handbook covering guidelines and procedures on process plants and interconnecting piping systems. As a follow up to the bestselling Smith's work was published in 2007 by GPC Books, "The Fundamentals of Piping Design", this book contributes more customized information about the equipment required for the process plant layout to match, such as: pumps; compressor;! heat exchangers, tanks, cooling towers and more importantly appliances combine best practices, Botermans and Smith extend the benefits of the book to combine: Instructions for putting plants; Applicable international code, Piping support and stress issues, operation and maintenance of pipeline design influence, and, action safety precautions. While integrating equipment with all the important design considerations, the two volumes together are must-haves for any engineer continuing to learn about the design of pipelines and process equipment.

The Fundamentals of Piping Design: Drafting and Design Methods for Process Applications (Process Piping Design)

Get this  The Fundamentals of Piping Design: Drafting and Design Methods for Process Applications (Process Piping Design) (v. 1) today!
Written for the piper and engineer in the field, this book fills a large void in piping literature since the "Rip Weaver" books of the 90's was taken out of print. Focusing not only on Auto CAD, but also on other computer-aided design programs as well and manual techniques not found anywhere else, the book covers the entire spectrum of needs for the piping engineer. Covering general piping systems, this basic guide for the piping engineer offers standards in practices for covered in the original series "Rip Weaver". It is the perfect introduction to the design of piping systems, various processes and the layout of pipe work connecting the major items of equipment for new employees, students and engineering veteran engineers need a reference.

Boiler Design - HRSG Design

Basics of Boiler and HRSG Design

A good primer for power plant professionals who have to wear many hats and need a practical explanation of the design and operation of conventional steam generating boiler base and HRSGs without having to wade through technical material. Buecker uses anecdotes and humor to liven up what would otherwise be considered a dry subject. No other book explains the fundamentals of boilers and HRSGs without going into technical depth.
Get this  Basics of Boiler and HRSG Design right now!
Brad Buecker provide consulting and technical writing from his home office in Lawrence, KS. He previously worked as a Technical Service Engineer to CEDA, Inc., a water and wastewater system supervisor at UCB Films, as a Senior Chemist for Burns & McDonnell Engineering, and as a results engineer, flue gas desulfurization (FGD) engineer, and analytical chemistry for the City, Water light & Power, Springfield, IL. Buecker has written more than 50 articles on steam generation, water treatment, and chemical FGD, and he is the author of two books on steam chemistry published by PennWell. He has B.S. in chemistry from Iowa State University, and is a member of the ACS, AIChE, ASME, and NACE. - This text refers to the out of print or unavailable edition of this title.

Power Boiler Design, Inspection, and Repair: Per ASME Boiler and Pressure

Get this  Power Boiler Design, Inspection, and Repair: Per ASME Boiler and Pressure (McGraw-Hill Professional Engineering) today!
According to the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, designed to provide information, it is clear that the most up-to-date on fabrication, inspection, testing and electric boilers.


With this book, readers will find valuable insights: National Board Inspection Code for repairs and changes to the rules, pipeline corrosion, integrity management, in-line inspection and pigs, run-or-repair decisions, analysis of metal loss B31G and RSTRENG, analysis of bender , gouges and fatigue damage and repair of non-welded and welded and replacement.

Features:

Installation, Operation, Inspection and Maintenance methods for improvement and change
An insight into the boiler inspector meeting code requirements
Expert recommendations for improvements and changes to the National Council Pressure Vessel Inspectors Boiler and standards
Design specifications
code calculations
Tips to meet local and national needs

WHAT'S IN:

  • Type Classification of Power Boilers
  • Design Criteria, Formulas, Calculations
  • Construction Materials and Methods
  • Safety Valves
  • Stamping of Code Symbols and Nameplates
  • Data Reports
  • Methods
This text is an excellent overview of the requirements of ASME for boiler design and fabrication. There is detailed information about the welding requirements for non-destructive testing and details about the test itself. This is useful for a quick but comprehensive introduction to the field of engineering detail and solid.


Boilers Design : A Practical Reference (Industrial Combustion)

Get Boilers: A Practical Reference (Industrial Combustion)  right now!
A unique guide to all aspects of boiler design and technology, the key entry covers the basic concepts and covers all types of boilers and their design. The book includes entries on all the major tools, including air pollution control technologies. Major areas of study include the fundamentals, including heat transfer, fluid flow, and metallurgy, engineering, components including boilers, pressure parts and boiler instrumentation, aide, including installation and fittings, pumps, and valves, and various types of boilers. The book also includes the latest clean technology and green.

Now you may also check out our other boiler design guide on:


Minggu, 23 September 2012

A Conceptual Aircraft Design Approach

Outstanding Summary of Conceptual Aircraft Design Approach

Summerfield Book Award Winner, winner of the Aviation-Space Writers Association of Excellence, and with over 30,000 copies sold, this is consistent AIAA selling titles. This highly respected book presents the entire process of conceptual aircraft design - from requirements definition to initial size, configuration layout, analysis, measurement, and trade studies - in the same manner seen in industry aircraft design groups. Attractive and easy to read, this book has over 900 pages of design methods, illustrations, tips, explanations, and equations, and has extensive appendix with key data essential to design. This book is the required design text at various universities around the world and a favorite of practicing design engineers.
Get this  Aircraft Design: A Conceptual Approach, Fourth Edition (Aiaa Education Series) today!
The fourth edition of the new improved in many areas, with improvements and reworking of the text, extending the size and method of analysis, and up-to-date treatments of emerging technologies and concepts. A new section of Conceptual Aircraft Design Approach provides an introduction to spaceflight and rockets including thrust analysis and vehicle sizes for launch and planetary missions. Appendix revised and additional exam questions are provided.

"I never felt that I had a good formulation (Design) until I read the introduction of Daniel Raymer Aircraft Design: A Conceptual Approach Raymer ... implies that design involves far more than drawing a pretty shape and then shoe-horning people., Machine and structural members into it involves art. Raymer's book .... take a practical, not an academic, design development covers not only aerodynamics, stability and stress analysis .... but also the interstitial stuff about general arrangement and interaction design considerations that actually compete grout that holds a design together -. Peter Garrison, in Flying, May 1997 Reliable - as always from AIAA, the best source of quality aircraft technical literature. - Craig Roberts, Roberts Sport aircraft Reference Position - more homebuilders / designers need to purchase this text Keep making your book available to EAA -! Brad Knapp, EAA as if this book was written specifically for me and bring closure to the understanding of theoretical concepts -. James "


It was very good, and at this Conceptual Aircraft Design Approach book, authoratative about aircraft design. For anyone who wants to be an aerospace engineer reading a book like this should put any kind of work they would do in the right context.

The best part of this book is that it is divided into two parts. Frist half talks specifically about aircraft design from a practical level, covering topics such as wing planform selection, thrust and weight determination of wing loading, sizing machines, configuraiton landing gear, etc. It is applied, the type of knowledge-oriented design and thought that all engineers need and unfortunately not taught by most schools, though of course specifically for aircraft. (Lecture I had only one ten week aircraft design courses through the entire four-year curriculum of the course is offered in two parts .. Only one of the parts even have this book on your reading list, and then not even use it in class!) The second part explore methods of analysis used for the "size" is different from the aircraft, such as the method for predicting the drag (for engine thrust on a cruise), to predict both subsonically downwash and supersonically (effects total lift and stability and control), to determine the rough size of the beam members and torsion structure, the size of the control surfaces for stability and control, etc. There is also a nice interlude in which the author gives us an example of a step-by-step how you can do the conceptual design. (This is not the ONLY way to do conceptual design, but it is important to have SOME method and is an introduction to one.) This design also has two good examples in the appendix, plus a LOT of good reference data in this book.

This is the kind of book that should be read first by anyone involved with the design of the aircraft and / or research and development so that they can understand the big picture framework of how aircraft are generally configured.


About A Conceptual Aircraft Design Approach Author

Daniel P. Raymer has over 25 years experience in Aircraft Design and Layout Configuration, Computer-aided Design Methodology and Design Education and has received a Rockwell Engineer of the Year Award for his work in computer-aided aircraft design methodology, and the AIAA Summerfield Book award for his best-selling "Aircraft design: A conceptual approach "textbook. He is President of Conceptual Research Corporation, and consulted for the RAND Corporation, among others. Previous positions include Director of Advanced Design at Lockheed, Mission Director at Aerojet Propulsion Future Research Institute, and the Project Manager-Engineering at Rockwell North American Aviation. Raymer received B.S. and M.S. degree in Aeronautics and Astronautics from Purdue and an MBA from the University of Southern California. - This text refers to the out of print or unavailable edition of this title.

Please also check out our other Conceptual Aircraft Design Approach collection: