Japanese Aircraft Passengers Struck by Lightning

A plane carrying starflyer 145 passengers and crew from the airport Kitakyushu in Fukuoka Prefecture, southwestern Japan, according to local press on Monday, struck by lightning, Sunday (11/11).

In the report it is said, the plane was struck by lightning at 22:00 local time, about 25 minutes after taking off from the airport. The plane finally landed in a safe condition at Haneda Airport, Tokyo, at around 23:00 local time. No passengers or crew were reported injured.

It was also said the pilot saw a crack in the cockpit window after a lightning strike that. The airlines and aviation bureau Japan have started checking for damage caused by lightning strikes.

Well Completion Design - Developments in Petroleum Science

Settlement is the link between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. Shall be designed to safely maximize the recovery of hydrocarbons from a well and may have to last for many years under changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions.

Well Completion Design, Volume 56 (Developments in Petroleum Science) 

• Course book based on course completion design by TRACS International either
• Unique in its field: Coverage of offshore, subsea, and landbased settlement in all the world's major hydrocarbon basins.
• Full color

Advanced Well Completion Engineering

Advanced Well Completion Engineering, Third Edition 

Once the natural gas or oil wells were drilled, and have verified that the commercial should be "resolved" to allow the flow of oil or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and gradually the right equipment to ensure smooth flow out of the well. In recent years, this process has been greatly enhanced by new technology. Well Completion Engineering summarizes and explains sophisticated advancement while providing expert advice for deploying new systems engineering breakthroughs.

This book has two themes: one, the idea of ​​preventing damage, and prevents the formation of drilling into an oil formation stage to put a good introduction, and two, the use of nodal system analysis method, which optimizes the pressure distribution of the reservoir to the well head, and plays sensitivity analysis to design first and then the tube diameter production casing size, so as to achieve the optimization of the entire system. With this book, drilling and production engineers should be able to improve operational efficiency by implementing the latest state of the art technology in all aspects of well completion during development drilling completion and work over operations.

One of the books devoted solely to key technologies for all aspects of the event settlement is well advanced.

Unique coverage of all aspects of well completion by 25 years of industry exploration, production and completion.

Matchless in-depth technical advice to achieve operational excellence with advance solutions.

"Well done Engineering, explains Renpu (China National Petroleum Corporation), involves ensuring regular and safe production and extend the life of oil and gas production wells. He said traditional practices that have been developed in China are no longer adequate for the changing circumstances and changing, and must be reformed , or advanced. It covers the basics, selection mode, select and specify the size of tubing and production casing, completion fluids and perforating, production casing and cementing, perforating, completion of the evaluation of formation damage well, measures to put wells in production, tubing string, wellhead assembly, and good corrosion and its prevention "-. SciTech Book News

Subsea Engineering Handbook

Subsea Engineering and Deepwater Petroleum Exploration & Production Handbook

Designing and building structures that will withstand the unique challenges that exist in Subsea operations is no easy task. As deepwater wells are drilled to greater depths, engineers are confronted with a new set of problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility, to name just a few. A definitive reference for engineers designing, analyzing and instilling offshore structures, Subsea Structural Engineering Handbook provides an expert guide to the key processes, technologies and equipment that comprise contemporary offshore structures.

You can have this  Subsea Engineering Handbook  right now!

Written in language that is clear and easy to understand, the book is based on the authors 30 years of experience in analysis, design and gradually offshore structures. This book answers important questions mentioned above and covers the entire spectrum of subjects in the discipline, from route selection and planning to design, construction, installation, materials and corrosion, inspection, welding, repair, risk assessment, and applicable design solutions. This produces a roadmap not only for the subsea engineer but also the project managers, estimators and regulatory personnel hoping to gain an appreciation of the overall issues and directed approaches to subsea engineering design solutions.

Up-to-date technical overview of deepwater riser engineering
Easy to understand Coverage of design, analysis and, stallation
Address issues of fixed and floating platforms
Covers techincal equipment such as Subsea Control Systems, Pressure Piping, Connectors and Equipment Layout as well as remotely operated vehicles

"Combined, these two authors have a long career with large international companies and educational institutions in the U.S., Japan, and Norway. They have prepared this book for prospective subsea engineers, discipline described in the preface that involves" the design, analysis, construction, installation and integrity management of subsea wellhead, trees, manifolds, jumpers and PLEMs PLETS .... "Coverage is logically organized, beginning with a subsea production system (the development, distribution, surveying, positioning, and foundations, the estimated cost. Coverage of power supply, and the risk and reliability, among other topics) further includes insurance and engineering flow systems, structures and equipment., and umbilical, risers & flowlines to the Gulf oil spill, the world saw the consequences of poor engineering and management; texts is important for a thorough education of future practitioners "-. News Books, Reference & Research

About the Subsea Engineering Handbook's Author
Yong Bai working in structural analysis and design with a focus on pipelines, risers and floating systems. Yong has led several projects Asgard Transport pipeline and flowline at JP Kenny Norway office as its Manager Advanced Engineering Dept. Previous Yong has been a lead riser engineer at Shell EP Projects, and leading offshore development rules in the American Bureau of Shipping (ABS) as a manager over Department of Offshore Technology as a professor, he wrote a book entitled "Subsea Pipelines and risers" and "Marine Structural Design" and served as course leader for IBC and Clarion courses on Pipeline Design and floating riser and System Design. Yong is President of the Offshore Pipeline & Risers (OPR) Inc., a design / consulting in the areas of plumbing, risers and floating systems.

Deepwater Petroleum Exploration & Production: A Nontechnical Guide, 2nd Edition

You can have this  Deepwater Petroleum Exploration & Production: A Nontechnical Guide, 2nd Edition right now!

New second edition of the authoritative book has retained all the good original bestseller, describes the unique challenges of the oil and gas exploration and production in the world's deepwater provinces. New chapters on geology and geophysics, rig, and vehicle service included, and the scientific and engineering schemes used in deepwater will be discussed in more detail. The case studies in several chapters provide practical examples, while the final chapter presents the latest technology used in the "third wave" industrial evolution.

Having more than I even anticipated. Thorough and precise. I have learned a lot from this book, especially geosciences and then came part Elementary drilling in water. I am very impressed.

Dr. Leffler has had 36 years of experience in the sector of the oil industry exploration / production, petrochemical, refining, marketing and transportation as a manager, consultant, strategist, and other executive positions for Dutch / Shell Companies Royal. Leffler has authored or co-authored several books that have become industry standards, including

• Petroleum Refining in Nontechnical Language
• Petrochemicals in nontechnical language
• Deepwater Exploration & Production - Free nontechnical
• Oil & Gas Pipe in nontechnical language
• Oil & Gas Production in Nontechnical Language.
• More than 120,000 copies of the books have been sold.

The Piping Guide For the Design and Drafting of Industrial Piping Systems

From the development of the initial requirements for the final image that is used in construction, this authoritative reference for the design and preparation of industrial piping systems provide the step-by-step instructions for pipeline design. Created as a deep resource for professionals, this Bible is a valuable pipeline in the field as in the office or classroom. Among the topics covered in the survey is encyclopedic piping design engineering, pipe assembly of the components, the method to connect the pipe to the equipment, office organization, to translate the concept into the design is complete, and the terms and abbreviations are concerned. An extensive selection of charts and tables present a variety of information-frequently used data, to establish the width pipeways factor, the distance between the pipes with and without flanges and to "jumpovers" and "runarounds," principal dimensions and weights for key components; conversion to customary and metric units, direct-reading metric conversion tables for dimensions and data, and a metric supplement with principal dimensional data in millimeters-handily organized for quick reference.

Get this  The Piping Guide: For the Design and Drafting of Industrial Piping Systems  today!

I use this book all the time for the picture tube. I agree with others that it is really "the Bible of Process Piping". I am an engineer barrow of my frequent. Pictures and graphics on each page. Welding specifications for pipes, pipe fittings and instrumentation assembly details, details of support for pipes, valves of different descriptions and details, P & ID symbols, welding symbols, tons of pictures all show the procedure for the preparation of piping layout and piping details examples, charts many many just about anything you need from the beam size for a standard flange, stress, thread depth charts, etc.. It is one, buy it!

This is one of the best books I've encountered in years piping. This book is a complete, concise and very informative. This is a great addition to my library and piping would'nt go on the road without it! A "must have" book for all technical, designers and draftsmen engineers!

Process Plant Layout and Piping Design

Get this Process Plant Layout and Piping Design right now!

Based on the collective author of '65 years of experience in the engineering construction industry, this profusely illustrated comprehensive guidebook presents a method that can be applied to a tried-and-true and the rule of thumb for plant layout and piping design for the process industries. Content organized and presented for quick-reference on-the-job or for systematic study of specific topics. Presents general concepts and principles of plant layout - from basic terminology and input requirements to deliverables, deals with specific pieces of equipment and the most efficient layout in the overall plant design configuration, discuss plant layout requirements for the most common process equipment units ; include piping requirements for the entire plant as well as all types of equipment, and considering the computerized tools that are now available to help plant layout and piping designers. Features more than 640 illustrations of equipment, piping and other components of processing facility - and their configurations. MARKETS: For mechanical and chemical engineers working for engineering construction as well as process manufacturing companies with responsibility for plant layout, plumbing, and construction, and for engineering students.

Advanced Piping Design (Process Piping Design)

Get this Advanced Piping Design (Process Piping Design) right now!

Written for engineers and piping designers in the field, this two-part series helps to fill a severe void in piping literature, since the "Rip Weaver" books of the 90's was taken out of print at the advent of Computer Aided Design (CAD) era. "Advanced Piping Design" is a mid-level handbook covering guidelines and procedures on process plants and interconnecting piping systems. As a follow up to the bestselling Smith's work was published in 2007 by GPC Books, "The Fundamentals of Piping Design", this book contributes more customized information about the equipment required for the process plant layout to match, such as: pumps; compressor;! heat exchangers, tanks, cooling towers and more importantly appliances combine best practices, Botermans and Smith extend the benefits of the book to combine: Instructions for putting plants; Applicable international code, Piping support and stress issues, operation and maintenance of pipeline design influence, and, action safety precautions. While integrating equipment with all the important design considerations, the two volumes together are must-haves for any engineer continuing to learn about the design of pipelines and process equipment.

The Fundamentals of Piping Design: Drafting and Design Methods for Process Applications (Process Piping Design)

Get this  The Fundamentals of Piping Design: Drafting and Design Methods for Process Applications (Process Piping Design) (v. 1) today!

Written for the piper and engineer in the field, this book fills a large void in piping literature since the "Rip Weaver" books of the 90's was taken out of print. Focusing not only on Auto CAD, but also on other computer-aided design programs as well and manual techniques not found anywhere else, the book covers the entire spectrum of needs for the piping engineer. Covering general piping systems, this basic guide for the piping engineer offers standards in practices for covered in the original series "Rip Weaver". It is the perfect introduction to the design of piping systems, various processes and the layout of pipe work connecting the major items of equipment for new employees, students and engineering veteran engineers need a reference.

Boiler Design - HRSG Design

Basics of Boiler and HRSG Design

A good primer for power plant professionals who have to wear many hats and need a practical explanation of the design and operation of conventional steam generating boiler base and HRSGs without having to wade through technical material. Buecker uses anecdotes and humor to liven up what would otherwise be considered a dry subject. No other book explains the fundamentals of boilers and HRSGs without going into technical depth.

Get this  Basics of Boiler and HRSG Design right now!

Brad Buecker provide consulting and technical writing from his home office in Lawrence, KS. He previously worked as a Technical Service Engineer to CEDA, Inc., a water and wastewater system supervisor at UCB Films, as a Senior Chemist for Burns & McDonnell Engineering, and as a results engineer, flue gas desulfurization (FGD) engineer, and analytical chemistry for the City, Water light & Power, Springfield, IL. Buecker has written more than 50 articles on steam generation, water treatment, and chemical FGD, and he is the author of two books on steam chemistry published by PennWell. He has B.S. in chemistry from Iowa State University, and is a member of the ACS, AIChE, ASME, and NACE. - This text refers to the out of print or unavailable edition of this title.

Power Boiler Design, Inspection, and Repair: Per ASME Boiler and Pressure

Get this  Power Boiler Design, Inspection, and Repair: Per ASME Boiler and Pressure (McGraw-Hill Professional Engineering) today!

According to the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, designed to provide information, it is clear that the most up-to-date on fabrication, inspection, testing and electric boilers.


With this book, readers will find valuable insights: National Board Inspection Code for repairs and changes to the rules, pipeline corrosion, integrity management, in-line inspection and pigs, run-or-repair decisions, analysis of metal loss B31G and RSTRENG, analysis of bender , gouges and fatigue damage and repair of non-welded and welded and replacement.

Features:

Installation, Operation, Inspection and Maintenance methods for improvement and change
An insight into the boiler inspector meeting code requirements
Expert recommendations for improvements and changes to the National Council Pressure Vessel Inspectors Boiler and standards
Design specifications
code calculations
Tips to meet local and national needs

WHAT'S IN:

• Type Classification of Power Boilers
• Design Criteria, Formulas, Calculations
• Construction Materials and Methods
• Safety Valves
• Stamping of Code Symbols and Nameplates
• Data Reports
• Methods

This text is an excellent overview of the requirements of ASME for boiler design and fabrication. There is detailed information about the welding requirements for non-destructive testing and details about the test itself. This is useful for a quick but comprehensive introduction to the field of engineering detail and solid.

Boilers Design : A Practical Reference (Industrial Combustion)

Get Boilers: A Practical Reference (Industrial Combustion)  right now!

A unique guide to all aspects of boiler design and technology, the key entry covers the basic concepts and covers all types of boilers and their design. The book includes entries on all the major tools, including air pollution control technologies. Major areas of study include the fundamentals, including heat transfer, fluid flow, and metallurgy, engineering, components including boilers, pressure parts and boiler instrumentation, aide, including installation and fittings, pumps, and valves, and various types of boilers. The book also includes the latest clean technology and green.

Now you may also check out our other boiler design guide on:

• Boiler Operator's Handbook
• Design and Analysis of ASME Boiler & Pressure Vessel Components in the Creep Range
• The ASME Code Simplified: Power Boilers

A Conceptual Aircraft Design Approach

Outstanding Summary of Conceptual Aircraft Design Approach

Summerfield Book Award Winner, winner of the Aviation-Space Writers Association of Excellence, and with over 30,000 copies sold, this is consistent AIAA selling titles. This highly respected book presents the entire process of conceptual aircraft design - from requirements definition to initial size, configuration layout, analysis, measurement, and trade studies - in the same manner seen in industry aircraft design groups. Attractive and easy to read, this book has over 900 pages of design methods, illustrations, tips, explanations, and equations, and has extensive appendix with key data essential to design. This book is the required design text at various universities around the world and a favorite of practicing design engineers.

Get this  Aircraft Design: A Conceptual Approach, Fourth Edition (Aiaa Education Series) today!

The fourth edition of the new improved in many areas, with improvements and reworking of the text, extending the size and method of analysis, and up-to-date treatments of emerging technologies and concepts. A new section of Conceptual Aircraft Design Approach provides an introduction to spaceflight and rockets including thrust analysis and vehicle sizes for launch and planetary missions. Appendix revised and additional exam questions are provided.

"I never felt that I had a good formulation (Design) until I read the introduction of Daniel Raymer Aircraft Design: A Conceptual Approach Raymer ... implies that design involves far more than drawing a pretty shape and then shoe-horning people., Machine and structural members into it involves art. Raymer's book .... take a practical, not an academic, design development covers not only aerodynamics, stability and stress analysis .... but also the interstitial stuff about general arrangement and interaction design considerations that actually compete grout that holds a design together -. Peter Garrison, in Flying, May 1997 Reliable - as always from AIAA, the best source of quality aircraft technical literature. - Craig Roberts, Roberts Sport aircraft Reference Position - more homebuilders / designers need to purchase this text Keep making your book available to EAA -! Brad Knapp, EAA as if this book was written specifically for me and bring closure to the understanding of theoretical concepts -. James "


It was very good, and at this Conceptual Aircraft Design Approach book, authoratative about aircraft design. For anyone who wants to be an aerospace engineer reading a book like this should put any kind of work they would do in the right context.

The best part of this book is that it is divided into two parts. Frist half talks specifically about aircraft design from a practical level, covering topics such as wing planform selection, thrust and weight determination of wing loading, sizing machines, configuraiton landing gear, etc. It is applied, the type of knowledge-oriented design and thought that all engineers need and unfortunately not taught by most schools, though of course specifically for aircraft. (Lecture I had only one ten week aircraft design courses through the entire four-year curriculum of the course is offered in two parts .. Only one of the parts even have this book on your reading list, and then not even use it in class!) The second part explore methods of analysis used for the "size" is different from the aircraft, such as the method for predicting the drag (for engine thrust on a cruise), to predict both subsonically downwash and supersonically (effects total lift and stability and control), to determine the rough size of the beam members and torsion structure, the size of the control surfaces for stability and control, etc. There is also a nice interlude in which the author gives us an example of a step-by-step how you can do the conceptual design. (This is not the ONLY way to do conceptual design, but it is important to have SOME method and is an introduction to one.) This design also has two good examples in the appendix, plus a LOT of good reference data in this book.

This is the kind of book that should be read first by anyone involved with the design of the aircraft and / or research and development so that they can understand the big picture framework of how aircraft are generally configured.

About A Conceptual Aircraft Design Approach Author

Daniel P. Raymer has over 25 years experience in Aircraft Design and Layout Configuration, Computer-aided Design Methodology and Design Education and has received a Rockwell Engineer of the Year Award for his work in computer-aided aircraft design methodology, and the AIAA Summerfield Book award for his best-selling "Aircraft design: A conceptual approach "textbook. He is President of Conceptual Research Corporation, and consulted for the RAND Corporation, among others. Previous positions include Director of Advanced Design at Lockheed, Mission Director at Aerojet Propulsion Future Research Institute, and the Project Manager-Engineering at Rockwell North American Aviation. Raymer received B.S. and M.S. degree in Aeronautics and Astronautics from Purdue and an MBA from the University of Southern California. - This text refers to the out of print or unavailable edition of this title.

Please also check out our other Conceptual Aircraft Design Approach collection:

• Introduction to Aircraft Design (Cambridge Aerospace Series)
• Aircraft Conceptual Design Synthesis (Aerospace Series)
• Aircraft Design: A Conceptual Approach (Aiaa Education Series

Marine Replacement Impeller

Jabsco 920-0001 Marine Replacement Impeller (Neoprene, M Silhouette, 2" Deep, #7 Spline Drive, 5/8" Shaft, 8 Blade, 2 9/16" Diameter, Brass Insert

Jabsco flexible impellers offer reliable, efficient and long lasting performance. Use neoprene impellers for engine cooling and for fresh or salt water transfer duties. Neoprene impellers are suitable only when small amounts of oil or diesel fuel are present. Nitrile impellers are used for bilge pumping and for transfer duties where the water is heavily contaminated.

Get Jabsco 920-0001 Marine Replacement Impeller   today!

NTSB: Air Controller Nearly Causing a Collision

An air traffic controller with a history of discipline problems almost caused air collision between regional aircraft and small plane last year, the National Transportation Safety Board said Wednesday.

A regional jets operated by ExpressJet and single-engine Cessna came within 300 feet of colliding after they are cleared for take off on intersecting runways at the Gulfport-Biloxi International Airport in Mississippi on June 19, according to NTSB officials and documents released by the council.

There were 53 passengers and crew were regional jet, an Embraer ER145. A student pilot, accompanied by a flight instructor, flying the Cessna 172.

Robert Beck airport control tower first Cessna clean takeoff at runway 18, according to the document. Approximately 16 seconds later, Beck regional jet cleaning, Continental Express Flight 2555, to take off on runway 14, which crosses runway 18. No warning was issued for either pilot to other areas although other controller who heard takeoff distance told investigators he shouted a warning to Beck, "You've got two rolling!"

Both aircraft are in the same height, about 300 feet above the airport, when they passed within 300 feet laterally from each other. As the plane passed, ExpressJet captain shouted to his co-pilot: "Wow, it's close." One of the air traffic manager told investigators, "It's a miracle that nobody died," according to the NTSB summary of the interview the researcher.

The plane was headed Houston's Bush Intercontinental Airport, where he landed quietly. The aircraft was operated for Continental before joining fully in operation with United Airlines.
After that, air traffic officials told investigators Beck has a "history of professional shortcomings which include taking a shortcut with the phraseology and not in accordance with the standard checklist procedures," says the document.

Beck, a controller for 23 years, also has been suspended several times in the last five years for tardiness, absenteeism and failure to report arrests for driving under the influence. Beck has also been removed from the training tasks after training less experienced controllers complained that "Mr. Beck was in back of the room with his feet up and eyes closed" during the training session, the document said.

The Associated Press could not reach Beck by phone for comment.
Beck is still an air traffic controller at the airport in Gulfport, according to Federal Aviation Administration, which operates the air traffic control system of the nation.
"FAA makes changes to management in Gulfport following the incident in June and was suspended and decertified the controller involved. Controller that has been retrained and recertified," the agency said in a statement.

The NTSB has lifted an air traffic controller and pilot professionalism to the list of top safety concerns in response to a series of incidents over the past few years, including the crash of 2009 where the controller in New Jersey was talking on the phone to a friend about roasting a cat died when a small plane he was collided with a helicopter tour of handling air, killing nine people.

"Lack of focus in the air collision near (in Mississippi) between commercial jets and a small private plane is a reminder that a single error can have potentially disastrous consequences," said NTSB Chairman Deborah Hersman said in a statement.
"While most individuals in the aviation industry in a focused and professional, events like this continue to happen, which means there is still much work to be done to ensure that air travel as safe as possible," he said.

Last spring, FAA officials set some changes in scheduling air traffic controllers after several controllers caught sleeping on duty or, in one case, watching a movie.

Doug Church, spokesman for the National Air Traffic Controllers Association, said the union took the incident as a near-collision on the Mississippi "very serious."

"We welcome the investigation of this incident by federal officials and plans to cooperate with the FAA to continue to improve the security of our aviation system," said Church.

Schumacher-Manual Wheeled Battery Charger and Tester

This manual covers the wheels battery charger professional tester and provide various levels of charge and assist in fleet operations. He has the ability to analyze electrical and starting system problems. This charger is ideal for 6 and 12-volt battery. Its 200-amps help engines for emergency starting 40-amp fast charge to charge the battery in 1 to 3 hours. Cost of 2-amp trickle charge small 12-volt batteries 2 to 12 hours. This filler wheel has a multi-functional tester with two rotary switches and a voltmeter to assist in testing the battery.

• Equipped with cooling fan for high-performance and long life
• Accommodates both 6 and 12-volt batteries
• Helps in fleet operations
• Analyzes electrical and starting system problems
• Includes two rotary switches and a voltmeter
• Get Schumacher SE-4022 Manual Wheeled Battery Charger and Tester right now!

Schumacher SE-4020 10/40/200-AMP Wheel-Style Charger/Starter

Heavy-duty, powerful and durable- for the do-it-yourselfer and professional mechanic. All Schumacher wheel-style chargers have tough all-steel cases, coated with baked enamel finishes. They are also equipped with cooling fans and deeply-louvered ventilation for high performance and long life. Models are available for fleet, farm and industrial use with a variety of-Amp outputs, including high-output rates for starting most vehicles and a rate for slow charging.

• Heavy duty, wheel charger is recommended for home, farm, garage and recreational use on maintenance free, low maintenance, deep cycle and conventional 6 and 12-Volt batteries
• 10-Amp high rate continuous charger will recharge batteries in 3- to 5-hours
• 40-Amp fast charge will quickly recharge dead batteries in 40-minutes to 2-1/2-hours
• 200-Amp starter charger provides up to 350-Amps of engine cranking power to assist in starting cars, trucks, vans, RV's and most large industrial or farm equipment
• 150-Minute timer automatically shuts charger off or use the hold position for continuous or overnight charging
• Get Schumacher SE-4020 10/40/200-AMP Wheel-Style Charger/Starter right now!

Schumacher PSJ-2212 DSR ProSeries 2200 Peak Amps Jump Starter and Portable Power Unit

Schumacher PSJ-2212 Power Unit Proseries Jump Starter / Portable has a 2200 peak amps, 330 cranking amps and 275 cold cranking amps. It is a resource for all 12 Volt DC accessories equipped with 12-volt accessory plug. Additional features include: 3 amp automatic charger built in, otherwise hook-up alarm, heavy duty clamps with copper jaws replaced, 4 measuring 50 inches cable, high rubber base and durable impact polypropylene cases disposed for added safety. Power unit is great for camping, tailgating, power outages and more. With this unit the Power Jump Starter / Portable you will never be stranded or without power again.

• 2200 peak amperes, 330 cranking ampere and 275 cold cranking amperes
• 22 Ah professional grade, high output AGM battery
• 12 Volt DC power outlet
• 3 ampere built-in, automatic charger
• Heavy duty clamp have replaceable copper jaws
• Get  Schumacher PSJ-2212 DSR ProSeries 2200 Peak Amps Jump Starter and Portable Power Unit today!

Black & Decker VEC026BD Electromate 400 Jump-Starter with Built-In Air Compressor

The Electromate 400 Black & Decker Portable Power Station / Jump-Starter / Compressor has 450 instant amps to start your car in the unlikely event that your battery is dead. You can not rely on finding someone to jump-start your car, even if you have a set of jumper cables. Power Station / Jump-Starter / Compressor will alleviate this problem by giving you the power you need to do it yourself.

Ideal for Emergency Roadside
When your car loses power, Electromate 400 has enough power to both jump-start your vehicle and run emergency equipment such as portable lights, radios, cell phones, and small tools. The Electromate 400 is also ideal for non-emergency situations like tailgating parties, camping, power outages, and other situations where there is no wall outlet available. It is equipped with a 120V AC electrical outlet and one 12V DC outlet, allowing you to complete and operate more than one appliance at a time.

Inflate tires, sports equipment, and More
There is also a built-in air compressor that allows you to inflate bicycle tires, sports equipment, pool and toys, but the compressor is also powerful enough to pump the tires of your vehicle.

Other Features
The Electromate 400 also comes with a built-in light, ultra-bright LED work for emergency roadside assistance and exclusive, built-in 120-volt AC charger that plugs into any household outlet. Other features include a keyless on / off power safety switch, reverse hook-up alarm warning in case of jump-start cables attached to the wrong terminals, vehicle alternator voltage check, and battery status LED indicator.

Rechargeable
This unit recharge easily from any household AC outlet or DC automobile cigarette-plug style outlet, so it will be ready the next time you need it.

guarantee
Black & Decker offers a full 2 ​​year warranty.

• 450 amps instantly jump-starts without the need of another vehicle
• Built-in ultra-bright LED work light for emergency roadside assistance
• Exclusive built-in 120 volt AC charger for use with ordinary household extension cord for recharging
• Reverse hook-up warning alarm to prevent damage to vehicle or electronics
• One year warranty
• Get Black & Decker VEC026BD Electromate 400 Jump-Starter with Built-In Air Compressor right now!

Battery Jump-Start System with Built-In Air Compressor and Power Inverter

Convenience takes on new meaning with the Energizer efficient, reliable and user-friendly 84 020 All-In-One Battery 12V 18Ah Jumpstarter with Air Compressor and Power Inverter. Powered by 12-volt internal battery, 18Ah sealed lead-acid capable of delivering 350 CA, it is designed to quickly and securely deliver automotive power on three areas: jump-start the battery, compressed air for tire inflation and untethered AC and DC current suitable for almost any tool or gadget. Covering almost all needs temporary power, Energizer All-In-One provides all the power needed for any holiday.

Revive Your Car

In the case of a dead battery or severely deplete the Energizer All-In-One Jumpstarter allows you to get back on the road in minutes with only three color-coated following the step number on the outside of the unit. It's as easy as 1: ensure that the unit has been filled simply by pressing the button RATES; 2: attach color coded positively and negatively charged 24 "jumper cable power output, through their heavy-duty, spark-resitant battery clamps, to the positively charged the appropriate post on the battery your car off and land position in your engine block; 3: rotate the power switch located on the JUMP and clear control of the JUMP oFF, and start cars with dead batteries. when your vehicle starts and has been running at an idle for several minutes to remove All-in-One Jumpstarter cables in reverse order they are connected, turn off the unit and you're ready to roll.

Air Compressor

The only physical connection with any car has its way is through the tires. Because it's the right tire pressure can affect everything from the improved gas mileage, to improve the handling on the road and avoid unnecessary exposure to the possibility of a puncture or tire blowouts due to underinflation. Air compressor built into the Energizer All-In-One Jumpstarter easily address this problem by distributing portable power into the ability to fill the tires every time you need or want it to appear. When sufficiently charged, the unit is capable of inflating car tires almost all within 10 minutes, and is easy and safe to use with ON / OFF switch and a built-in pressure gauge located on the front of the unit. The compressor also is thermally protected from overheating, and have, strong cloth-covered hose output.

DC/AC Power and Light When and Where You Need It

Along with its automotive exclusive functionality, the Energizer All-In-One Jumpstarter provides all the power and access to power that you will ever need. The unit comes standard with two 12-volt DC cigarette sockets for powering 12V accessories. Both are protected by a 30-amp manual-reset circuit breaker, located at the back ensuring that your devices are never exposed to more power than they can safely handle. In addition, users also have convenient access to three-pronged AC power by way of the built-in 200 watt, DC/AC power inverter. This component also contains a built-in cooling fan to prevent any overheating during this power conversion and an ON/OFF AC power switch to minimize the possibility of power drain when cords are left plugged in. The All-In-One Jumpstarter also contains a flex-neck work light stored in the unit's handle that allows the user to shine a little light virtually any place.

Easy to Maintain Power Level

Because even the best jumpstarter unit is the use of little unless it contains enough power, Jumpstart Energizer All-In-One is designed to be easy to fill and easy to maintain. Unlike other manufacturers units that can be damaged by overcharging, the Jumpstart Energizer All-In-One contains a 12V, 1 amp internal two-stage battery charger that allows you to fluctuate within a very small range while attached to the AC current to filling. At the highest level through the middle of this range, charging stops, while the lowest is reached when charging begins again, continuing until the highest level is reached. This creates a cycle of charging, but battery cut off from the damaging effects of excess power. This means that the unit can safely be connected to the outlet without limit of time, ensure that the unit will be ready to pop into your luggage at full power whenever you want.

Key Features

• Rugged polypropylene case
• 12V, 18Ah sealed lead-acid battery capable of providing 350 CA
• Flex-neck light work
• Large, easy to use ON / OFF rotary switch to prevent the triggering
• 4 AWG output cable with 24 "reach
• Two 12V cigarette socket for powering 12V accessories; protected by circuit breakers re-30A instructions
• Battery status indicator to indicate the internal battery state of charge-
• 12V, 1 amp charger's internal battery; charger has a 2-stage so that the charger can be connected to an outlet indefinitely, allowing the internal battery should be maintained at full charge every time.
• The battery charge indicator to indicate when charging the internal battery which when fully charged ad
• "Shorted clamp" the audio alarm
• "Reverse Polarity" audio alarm
• 200 watts, DC / AC power inverter installed internally; have ON / OFF switch, an AC power outlet; cooling fan
• Internal air compressor capable of inflating a car tire in 10 minutes
• Pressure gauges and ON / OFF on the outside, and the compressor is thermally protected from overheating, have a strong, fabric covered hoses with screw-on output coupler valve stem
• Get All-In-One Jump-Start System with Built-In Air Compressor and Power Inverter right now! 

Battery Jump Starter with Compressor Offers a Convenient

Battery Jump Starter with Compressor 

Stanley 500-Amp Battery Jump Starter with Compressor offers, convenient portable to jump-start your battery without needing another vehicle. Simply attach the clamps are connected correctly and if the alarm will sound, alerting you to toggle clamp before turning on the unit. With enough power to jump-start your car, truck, motorcycle, boat, RV or tractor, Stanley 500-Amp Battery Jump Starter with Compressor is ideal for everyday use or emergencies on the roadside.

• Stanley J5C09 Jump Starter provides 500 amps of power
• Built-in air compressor for inflating tires
• 500-ampere instant starting power
• 1000 amps of peak power
• Alarm signals improper connection, ensuring correct jump starting every time
• Get Stanley J5C09 500-Amp Jump Starter with Built-In Air Compressor right now!

Auto Jump Starter-Portable Jump Starter

Pound for pound the most powerful jump starter on the market, Clore Automotive Jump Starter provides JNC660 1700 amperes peak power and start weighing only 18 kilograms. Ideal for use in various environments began to jump, including automotive, marine and industrial.

Serious Power for Starting Toughest Task

It's All About Batteries ...

Jump-N-Carry is all about power - the power to initiate what he does not want to run. Every aspect of the unit Jump-N-Carry adapted to support the purpose of providing electricity for as much as possible starting disabled vehicles, starting with its battery PROFORMER Clore. PROFORMER exclusive Clore Battery designed for maximum power density and durability, which produces tremendous power cranking, cranking extended duration, and long service life.

The JNC660 delivers 1700 Peak Amps and 425 Cranking Amps of starting power and weighs just 18 lbs. It's perfect for a variety of professional starting environments, including automotive service, fleet service, auto dealerships, auto auctions, marinas, implement dealerships and more. Give it a try and you'll see why it's the choice of pros the world around.

Combined with Component Power Road

But it does not end there. All other components of the "street power" that is designed to support the purpose of obtaining power jump starter for disabled vehicles. This includes the heavy-duty battery lead and mated with the output class industrial clamps penetrate corrosion on the battery electric vehicle for a good connection.

Features that Provide Real Benefits

No-fuss Charge

The auto-fill feature JNC660 using the built-in AC charger, making it easier to keep a beginner you jump in top operating condition. The charger on the JNC660 built right into the front of the unit - simply plug in a standard extension cord and begin charging - and never can be lost, misused, or walking on the service bay. Also, the charging system provides regular, useful and stops charging automatically when charging an onboard battery has reached full charge. This allows JNC660 to be connected to an AC outlet indefinitely without results that are harmful to the battery.

Repair Service Coupons

Each JNC660 including coupons Repair Service that allows for fixed costs, one-time repair the unit after a period of 1-Year Limited Warranty has expired. Coupons can be used for any repairs, regardless of the cause of damage to the unit. This provides great peace of mind that if your unit is damaged in any way, you can get it repaired at a fixed price.

Take from the Pros

For many professional technician, the Jump-N-Carry or not. Service operations that employ Jump-N-Carry jump starters know that there is no task too daunting start.

Get Clore Automotive JNC660 1700 Peak amp 12-Volt Jump Starter right now!

New Generation Su-35 Performs Flight Test

Russian aircraft manufacturer, Sukhoi, began test-flying the latest generation of fighter aircraft SukhoiSu-35S (Flanker-E). The third of a series aircraft was flown from the air base's Aircraft Production Association of Komsomolsk-on-Amur in Russia's Far East, on Tuesday (17/01/2012).

The plane flew for more than two hours to test the propulsion system and a new control system aircraft. Multirole combat aircraft with the mission of air superiority is equipped the latest generation of turbofan engines Saturn 117S (AL-41-F1S) with steering controls engine thrust(thrust vectoring control / TVC), which makes the aircraft has high maneuverability.

By the author, referred to as the Su-35S aircraft 4 + + generation using fifth-generation aircraft technology. Sukhoi's official website mentioned, the aircraft can be shot with a maximum speed of1,400 km per hour (Mach 1.1) at lower elevations and up to 2,400 miles per hour (close to Mach 2)at the highest limit of the operational altitude of the aircraft at 18,000 feet.

The plane was equipped with the latest generation of radar that can detect airborne targets from a distance of 400 kilometers and is capable of tracking and attacking multiple targets at once (track30 targets at once and attacked eight targets simultaneously in the air, plus the track four targets and attack two targets simultaneously at the ground ) from a distance of 30 kilometers with the OLS (optical locator station) in the cockpit.

Su-35 is an advanced development of the Su-27 Flanker. Air Force currently operates several variants of the Su-27 and Su-30, and reportedly interested in buying at least one squadron ofSu-35BM (export version of Su-35S) in the future.

Russian Air Force Operates A50U AWACS Aircraft

Early warning aircraft air control system (AWACS) A-50U that has been modernized into operation by the Russian Air Force, Tuesday (01/17/2012). The aircraft, which first made in the late 1970s is now equipped with new onboard computers and satellite communications and radar systems aremore sophisticated.

Defense Ministry spokesman Col. Vladimir Drik said the aircraft was handed over to the Russian Air Force choked in October 2011 to undergo flight test. Currently, all flight tests have been completed and the aircraft will begin operation in full, including follow all large military exercise this year.

With this modernization, the aircraft is now capable of detecting various types of air targets, ranging from helicopters, supersonic aircraft, to cruise missiles. The aircraft is also capable of tracking up to 10 fighter aircraft, both for the mission of air raids and air strikes to ground.

Beriev A-50 aircraft manufactured by passenger aircraft Ilyushin Il-76. The plane first flew in 1978 and started operating in 1984. The total number of 40 early warning aircraft was produced until1992.

Airbus Claims Boeing Defeat

airbus a320-aircraft 

Aircraft manufacturer Airbus to Boeing’s claims has been defeated in terms of aircraft orders during the year 2011. Airbus states, has won as many as 1608 aircraft orders, or a total of 1419units of the aircraft after a number of cancellations.

In terms of market domination, means Airbus has won 64 percent of the volume, and 54-56 percent of the sale value.

Both Airbus and Boeing, has announced a revitalization of production for the Airbus A320 and 737MAX Boeing so that more fuel-efficient.

Also reported the delivery of 534 Airbus aircraft in 2011. That figure is five percent higher than shipments in 2010. Both aircraft manufacturers really ramped up production to climb into the sky plane high demand from Asia.

"The year 2011 was a tough year for the world economy, but increasing air traffic trips triggered the increasing number of middle class. In 20 years, the journey will probably triple," said Chief Marketing Officer of Airbus, John Leahy, Wednesday (18 / 1 / 2012).

As for Boeing, last week announced the sale of 921 aircraft by 2011. And has sent the latest Boeing aircraft as much as 477 units to the various airlines of the world. Development is done Airbus and Boeing, has increased the monopoly of the two aircraft manufacturers, far beating Canada, Russia, and China.

But Leahy said, China will become a major threat in the next 25 years.

Design of Fastener: Inspection and Acceptance

Design of Fastener-8: Inspection and Acceptance

Guide in Design Fastener-Rivets Design

Rivets Design-Guide in Fastener Design-7

Arrow Fastener-Lever Feed Glue Gun

Arrow's Professional Automatic Lever Feed Glue Gun has heavy duty circuitry, a 6-foot cord, and comes in a reusable storage box. Its solid state P.T.C. heating system develops heat quicker and holds the temperature for smooth, consistent bonding. The high volume melt chamber makes for quick and steady application, while the clutch mechanism prevents glue buildup and the check valve controls glue flow. This glue gun also comes with an interchangeable nozzle and a built-in drip tray and stand.

Heavy Duty Circuitry
Non-Drip Nozzle
Check Valve Controls Glue Flow
Built In Drip Tray Stand
High Volume Melt Chamber for Even Application
Get Arrow Fastener TR550 Lever Feed Glue Gun right now!

Fastener Design Criteria

Fastener Design Criteria-Fastener Design Guide-6

Guide on Fastener Design Training: Part 5

Arrow Fastener-Forward Action Staple and Nail Gun

Squeezing trigger puts pressure on the front of the gun to ensure staples are driven flush to surface. Does not kick up like traditional staple guns. Requires less force to staple. Rubber soft grip handle cover for comfort. All metal housing. Staples remaining window. Quick load staple chamber slides away for easy loading and hassle free jam clearance. Flush design for use in corners and other tight spots. Capable of rapid fire. Built in wire attachment. Uses 1/4'' to 9/16'' Powershot or Arrow T50 staples. 1000 staples per pack. Shoots 9/16'' brads.

• Forward action design eliminates stapler "kickback"
• Capable of rapid fire
• One hand operation
• Anti-slip comfort grip
• Staples and nails remaining window
• Get  Arrow Fastener 8000 PowerShot Pro Forward Action Staple and Nail Gun today!

Tips and Guide on Fastener Design

Guide on Fastener Design-4

Guide on Fastener Design

Guide on Fastener Design-3

Arrow Fastener Electric Heavy Duty Staple Gun

Arrow Fastener ET155 ProShot 3 Electric Heavy Duty Staple Gun

The Arrow ProShot 3 Narrow Crown Staple Gun packs 12 amps of surge power when you need it and has a generous 10 foot power cord. The Arrow ET155 is a powerful, compact tool. Beneath its lightweight, die-cast aluminum housing is extraordinary power to drive staples flush. With the ET155’s penetrating adjustment dial you can fully control the driving power depending on the type of wood and thickness of the materials you’re using. Even with all this power, the ET155 is still compact enough to work in snug spaces, such as stair risers. Stapling in tight corners is no longer a problem thanks to the ET155’s 7/8-inch extended nose. The ET155 can use narrow crown staples from Duo-Fast (5/16”, 3/8”, 1/2”, 9/16”), Stanley-Bostitch (9/16”) and Crain (9/16”) as well as Arrow Fastener (3/8”, 1/2”, 9/16”).

How to Design Fastener?

How to Design Fastener? Fastener Design Guide-2

Used extensively by building contractors, home do-it-yourselfers and specialty trade applicators for stapling insulation, ceiling tile, window screening, upholstering, carpet padding, fence wire, metal lath, cornerite and 1,001 other jobs ranging from light to heavy duty work.

• Works great on weather-stripping, fencing, upholstery, and insulation
• Includes T50 staple gun (2750-0552), one box of 5/16" (2750-0735) staples, one wire attachment, one screen attachment, one staple lifter, and a custom made carrying case
• Also includes one staple lifter and a custom made carrying case
• Replacement staples 5/16" (2750-0735), 1250 per box
• Get  Arrow Fastener T50VP Heavy Duty 5 pc Staple Gun Kit right now!

What is a Fastener?

Fastener is a hardware device that mechanically joins or affixes two or more objects together.
Fasteners can also be used to seal containers such as bags, boxes, or envelopes, or they may involve keeping together the sides of the opening of flexible material, attaching a lid to a container, etc. There are also special-purpose closing devices, such as bread clip. Fasteners are used in behavior is often temporary, in the sense that they may be tied up and off repeatedly.

Some types of wood joints utilize a separate internal reinforcements, such as a pen or a biscuit, which in some sense can be considered fasteners within the scope of the system together, even though their own they are not general purpose fasteners.
Furniture package included in flat form often uses cam pen locked by cam locks, also known asconformat fasteners.

Items such as, string wire rope, (e.g. metal wire, possibly coated with plastic, or a parallel cable that is guarded by a plastic strip coating), cable, chain, or plastic wrap can be used to mechanically join objects, but generally not categorized as fasteners because they have additional general use. Likewise, hinges and springs may join objects together, but usually not considered fasteners because their primary purpose is to allow articulation rather than rigid affixment.

Arrow Fastener

• Designed for safe, fast and efficient Low Voltage wire fastening
• Tapered striking edge gets into close corners
• Grooved guide positions wire for proper staple envelopment
• Grooved driving blade halts staple at right height to prevent wire damage
• Round crown staple fits snugly around wire

Arrow Fastener T25 Low Voltage Wire Staple Gun, fits wire up to 1/4-Inch

Another alternative method of joining materials include crimping, welding, soldering, brazing, recording, gluing, cementing, or use any other adhesive. The use of force can also be used, such as with magnets, vacuum (like suction cups), or even friction.

Fastener Design Guide

Immediately N-219 Aircraft Entering Production Phase

N219 Aircraft-Indonesian Aerospace Industry

Indonesian Aerospace Industry immediately entered the stage production of new aircraft types, the N-219 aircraft capable of flying short distances of STOL (short-take off and landing / flying and landing on short runway).

This year Indonesian Aerospace Industry will make two prototypes (two aircraft in actual size), each of which will be used for test flying and static tests on the mainland, according to Director of Technology and Development Indonesian Aerospace Industry, Dita Ardonni Jafri in Bandung on Sunday (1/15/2012) .

Described, the basic design of the N-219 began in 2006 and until 2008 it has completed a variety of basic tests, including wind tunnel tests. Indonesian Aerospace Industry carry out various tests in cooperation with the Development Agency for Technology Assessment (BPPT).

This aircraft has a capacity of 19 passengers and is equipped with two engines and is designed to serve the needs of aviation pioneers to connect remote areas.

N-219 still have to undergo some kind of other tests, including static test aircraft, engine test production, and ultimately flight test. Year 2014 target is certified to fly the feasibility of the Ministry of Transportation and in 2015 entered the market to replace direncanakan class aircraft that had entered old age.

Some local governments have expressed an interest to be able to operate the aircraft N-219. The aircraft is suitable for connecting flights between District and remote areas in the country.

In addition, PT Merpati Nusantara Airlines (MNA PT.) also expressed interest to operate and plan to buy as many as 20 aircraft as it had been delivered by the Minister of SOEs after a working meeting with the House of Representatives Commission VI in the House of Representatives in July 2011.

Market survey was done Indonesian Aerospace Industry show, currently in Indonesia required the N-219 class aircraft ranging from 202, consists of 97 pieces of civil needs and the needs of military and special mission of 105 pieces.

In addition corresponds to the situation and condition of the airport runway is not smooth, the plane is also capable of taking off and landing on short runway (600 meters) with high stability, compatible with many remote airports in Indonesia who do not have large land.

In addition, the aircraft was designed in order to perform well and comfortably maneuver. Aircraft structures are also designed to carry more fuel than other aircraft classmates to remember that not all airports in remote areas have refueling facilities.

The aircraft is designed has a range up to 650 Nm (1,200 km) with a maximum speed of 213 kts (395 km / h), while the price of the aircraft is more expensive than other aircraft that class, as well as operational costs were relatively low.

Indonesian Aerospace Industry has previously been successfully producing aircraft including many used in the world, the CN-235 in cooperation with the firm CASA, Spain. Even before, they've managed to create a larger aircraft, the N-250 in the mid-1990s.

For the CN-235, a number of countries listed as the biggest users of Turkey (60 aircraft), Korea (20 aircraft), the French Air Force (19 aircraft) and Malaysia (eight aircraft).

User countries other CN-235, is Saudi Arabia, Azerbaijan, Bophuthatswana, Brunei Darussalam, Burkina Faso, Chile, Colombia, Ecuador, Ireland, Jordan, Mexico, Morocco, Pakistan, Papua New Guinea, South Africa, Senegal, United Arab Emirates , Venezuela and the United States.

In 2011, Indonesian Aerospace Industry has sent three aircraft type N-235 maritime reconnaissance to the Agency for the South Korean Coast Guard (KCG), the other one will be delivered in March 2012.